1)Turn off the power supply.

2)Remove the panels. Be sure to disconnect the dispense switch connector from the control box when removing the front panel.

3)Recover the refrigerant and store it in an approved container.

4)Remove the screw and the solenoid.

5)Disconnect the hot gas valve using brazing equipment.

6)Install the new valve.

CAUTION

Always protect the valve body by using a damp cloth to prevent the valve from overheating. Do not braze with the valve body exceeding 250°F (121°C).

7)Install the new drier.

8)Check for leaks using nitrogen gas (140 PSIG) and soap bubbles.

9)Evacuate the system, and charge it with refrigerant. See the nameplate for the required refrigerant charge.

10)Cut the leads of the solenoid allowing enough lead length to reconnect using closed end connectors.

11)Connect the new solenoid leads.

12)Attach the solenoid to the valve body, and secure it with a screw.

13)Replace the panels in their correct positions.

14)Turn on the power supply.

G.Removal and Replacement of Evaporator

IMPORTANT

1.Always install a new drier every time the sealed refrigeration system is opened. Do not replace the drier until after all other repairs or replacement have been made.

2.Because the pipes in the evaporator section are specially coated to resist corrosion, it is important to make the new evaporator inlet and outlet piping connections outside the evaporator section as described below.

1)Turn off the power supply.

2)Remove the outer panels and the evaporator insulation panels. Be sure to disconnect the dispense switch connector from the control box when removing the front panel.

3)Recover the refrigerant and store it in an approved container.

4)Remove the spray tubes and the insulations at the "U" shaped notch where the refrigeration tubings go through the molded chassis.

5)Remove the insulation tube, and disconnect the evaporator inlet piping at the tee before the expansion valve. Disconnect the evaporator outlet piping before the heat exchanger.

36

Page 35 Page 37
Page 36
Image 36
Hoshizaki DKM-500BAH service manual Removal and Replacement of Evaporator
Page 35 Page 37

DKM-500BAH specifications

The Hoshizaki DKM-500BAH is a high-performing ice maker renowned in the food service industry for its reliability and efficiency. This unit excels in producing crescent-style ice, which is highly sought after for its ability to chill beverages effectively while minimizing dilution. The Hoshizaki reputation for quality is well-reflected in the DKM-500BAH, making it a popular choice in restaurants, bars, and other establishments that demand high ice production capacity.

One of the standout features of the DKM-500BAH is its impressive ice production capability. This model has the capacity to produce up to 500 pounds of ice per day, ensuring that businesses with high-volume demands can meet their needs without interruption. The unit operates on a refrigerant system designed for optimal energy efficiency, which can lower operating costs and contribute to sustainability goals.

The DKM-500BAH utilizes advanced technology, including Hoshizaki's patented ice-making mechanism. This system features a stainless steel evaporator that enhances durability and ice quality. The crescent-shaped ice it produces has a slower melt rate, making it perfect for restaurants and bars that focus on customer experience. Additionally, the unit is equipped with a cycle control that ensures ice is produced consistently.

Another critical aspect of the DKM-500BAH is its user-friendly design. It features a front-facing control panel that allows for easy monitoring and adjustment of settings. A built-in diagnostics system alerts users to potential issues, enabling prompt maintenance and reducing downtime. The removable air filter is another convenience, making it simple to clean and maintain the unit’s efficiency.

Moreover, the construction of the DKM-500BAH is noteworthy. It features a corrosion-resistant stainless steel exterior that ensures longevity and maintains hygiene standards. The unit also has an insulated storage bin that holds up to 250 pounds of ice, making it an efficient solution for busy settings.

In summary, the Hoshizaki DKM-500BAH is a robust ice maker that combines high production capacity, advanced technology, and user-friendly features. Its build quality and efficient performance position it as a leader in the commercial ice-making market, making it an ideal investment for establishments requiring reliable ice supply.
Top Page Image Contents