5) Freeze Timer
CAUTION
Adjust to proper specification, or the unit may not operate correctly.
Two new dip switches numbered 9 and 10 have been added to the improved “E” board to better prevent possible freeze ups. These settings come factory set to the default setting of 50 min. (OFF, ON). Check the adjustment chart published in the Tech Specs for proper settings.
SETTING |
| TIME | |
Dip Switch | Dip Switch |
| |
No. 9 |
| No. 10 |
|
OFF |
| OFF | 60 min. |
ON |
| OFF | 70 min. |
OFF |
| ON | 50 min. |
ON |
| ON | 60 min. |
6) Bin Control
CAUTION
When the ambient temperature is below 45°F, the Bin Control Thermostat operates to stop the icemaker even if the Ice Storage Bin is empty. When the Thermostat is set in the prohibited range, the icemaker operates con- tinuously even if the Ice Storage Bin is filled with ice. Setting in the prohib- ited range might cause severe damage to the icemaker resulting in failure.
No adjustment is required under normal use, as the Bin Control is
[e] CHECKING THE CONTROLLER BOARD
1)Visually check the sequence with the icemaker operating.
2)Visually check the Controller Board by using the following procedures.
(i)Adjust the Defrost Timer to minimum position. Disconnect the Thermistor from the Controller Board.
Connect a 1.5 kΩ - 3.5 kΩ resistor to the Connector K3 (pins #1 and #2), and energize the unit.
20
