HotBrick Network Solutions

Settings – Advanced Features

 

 

Remote

Remote Upgrade – If enabled, you can use the supplied Windows program to

Access

remotely upgrade the Firmware. If not enabled, upgrades must be performed

Configuration

by a PC on the LAN.

 

Remote Web-based setup - – If enabled, access to the Web-based interface

 

is available via the Internet. (See below for details.) If not enabled, access is

 

only available to PCs on the LAN.

 

Port – The port number used when connecting remotely. See below for

 

details.

 

Allowed IP range – Remote access is only available to the IP addresses

 

entered here.

 

Leaving these fields blank will allow access by all PCs.

 

These addresses must be Internet IP addresses, not addresses on the

 

local LAN.

 

To specify a single address, enter it in both fields.

 

IDENT Port – Port 113 is associated with the Internet's (Identification /

 

Authentication) service. When a client program in your computer contacts a

 

remote server for services such as POP, IMAP, SMTP, that remote server

 

sends back a query to the "Ident" server running in many systems listening for

 

these queries on port 113. This means that port 113 is often probed by

 

attackers as a rich source of your personal information. By default it is

 

“Disable”.

 

 

External

These settings determine whether or not the VPN 800/2 Firewall Router should

Filters

respond to ICMP (ping) requests received from the WAN port.

Configuration

Block Selected packet types – This acts as "master" switch. If checked, the

 

 

selected packet types are blocked. Otherwise, they are accepted.

 

Echo Request, Timestamp Request, … Select the packet types you wish to

 

block, using the checkboxes.

DNS

When you have some servers on LAN and their domain names have already

Loopback

registered on public DNS. To avoid DNS loopback problem, please enter the

 

following fields.

 

Domain Name – Enter the domain name specified by you for local

 

host/server.

 

Private IP – Enter the private IP address of your local host/server.

Page 43

Page 47
Image 47
HotBrick VPN 800 manual Settings Advanced Features