| HotBrick Network Solutions |
|
|
Host Network | • Bind WAN port/Session – Select Enable if you wish to associate this PC with |
Binding | a particular PPPoE Session. All traffic for that PC will then use the selected |
| PPPoE port and session. |
| • Binding Method – Suppose your PC is bound to WAN1 port, now you are |
| selecting “Strict Binding”. If WAN1 port is disconnected, your packets cannot |
| go out through WAN2 port, if WAN2 port is still alive. If you are selecting |
| “Loose Binding” then when WAN1 port is disconnected, your packets will |
| automatically go to WAN2, if WAN2 is alive. |
| • Select WAN Port/Select PPPoE session – If the setting above is Enable, |
| select the desired Port and Session. Otherwise, ignore these settings. |
| Note: Multiple PPPoE sessions are defined on the Advanced PPPoE screen. |
|
|
Buttons | • Add – Use this to add a new entry to the database, using the data shown on |
| screen. |
| • Delete – Click this to delete the selected entry. |
| • Update – Use this to update the selected entry, after making the desired |
| changes. |
| • Reset – Reverse any changes you have made since loading the data from the |
| VPN 800/2 Firewall Router. |
Host & Group | This table shows the current bindings. |
List |
|
Page 27
