HotBrick Network Solutions

Advanced PPPoE

The screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.

 

Figure 3-3: Advanced PPPoE

Settings – Advanced PPPoE

 

 

WAN Port

Select the desired Port and Session, then click the "Select" button. The data

PPPoE Session

for the selected Port/Session will then be displayed in the WAN IP Account

 

section.

Session MTU

The Maximum Transfer Unit for PPPoE packets data. Leave it as default,

 

unless the ISP offers different PPPoE packets data size.

 

 

WAN IP Account

User Name – Enter the PPPoE user name assigned by your ISP.

 

Password – Enter the PPPoE password assigned by your ISP.

 

Verify Password Re-enter the PPPoE password assigned by your ISP.

 

IP Address – If you have a fixed IP address, enter if here. Otherwise, this

 

field should be left at 0.0.0.0.

 

Host Name – This field is used by a Host to uniquely associate an access

 

concentrator to a particular Host request.

Page 22

Page 26
Image 26
HotBrick VPN 800 manual Settings Advanced PPPoE