HotBrick VPN 800 manual Windows TCP/IP Setup, Overview TCP/IP Settings

HotBrick Network Solutions

Appendix B

Windows TCP/IP Setup

Overview

TCP/IP Settings

If using the default Load Balancer settings, and the default Windows 95/98/ME/2000 TCP/IP settings, no changes need to be made.

•By default, the VPN 800/2 Firewall Router will act as a DHCP Server, automatically providing a suitable IP Address (and related information) to each PC when the PC boots.

•For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.

•If you wish to check your TCP/IP settings, the procedure is described in the following sections.

•If your LAN has a Router, the LAN Administrator must re-configure the Router itself.

Checking TCP/IP Settings - Windows 9x/ME:

1. Select Control Panel - Network. You should see a screen like the following:

Figure B-1: Network Configuration

2.Select the TCP/IP protocol for your network card.

3.Click on the Properties button. You should then see a screen like the following.

Page 78