HotBrick Network Solutions

VPN Policy Setup

 

VPN Tunnel List– It shows the tunnels that you have entered. The

 

router can setup up to 20 tunnels

IPSec Traffic Binding

Tunnel Name– In order to distinguish the tunnel, you have to give

“Tunnel” a name..

 

 

Tunnel – Only enable tunnel check box, the tunnel can be connected.

 

WAN port – You can choose WAN1, WAN2 or Any to make the VPN

 

connection.

 

PPPoE Session– If you are using PPPoE to make the connection, and

 

some ISP offers multiple PPPoE session, you can select these PPPoE

 

session to construct VPN tunnels.

 

Local Identity Type – You can either choose your Local WAN IP or

 

Domain name, Distinguished Name as your local identity.

Traffic Selector

ServiceProtocol Type: You can choose either TCP/UDP/ICMP/GRE

 

protocol as your connection protocol. By default the protocol type is

 

“Any”.

 

Local Security Network– These entries identify the private network on

 

this VPN router, the hosts of which can use the LAN-to-LAN

 

connection. You can choose a single IP address, the subnet, or a

 

selected IP range to make VPN LAN-to-LAN connection.

 

Remote Security Network– These entries identify the private network

 

on the remote peer VPN router whose hosts can use the LAN-to-LAN

 

connection. You can choose a single IP address, the subnet, or a

 

selected IP range to make VPN connection

 

Remote Security Gateway – You can either select remote side

 

domain name or remote side IP address (WAN IP address) as your

 

remote side security gateway.

Security Level

Encryption Method – It specifies the encryption mechanism to use.

 

Data encryption makes the data unreadable if intercepted. There are

 

three encryption method available; DES/3DES and AES. The default

 

is null.

 

Authentication – It specifies the packets authentication mechanism to

 

use. Packets authentication proves that data comes from source you

 

think it comes from. There are three authentications available. MD5,

 

SHA1 and SHA2.

Page 55

Page 59
Image 59
HotBrick VPN 800 manual VPN Policy Setup, IPSec Traffic Binding, Traffic Selector, Security Level