PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) ans has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of readio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refrigerate and freeze foodstuffs, following the instructions for use con- tained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is installed between cabinets, make sure that the cord is not bent or dan- gerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appliance, especially with wet hands because this could result in injury. Never put ice cubes just removed from the freezer into your

mouth because they could stick to your mouth and cause burns.

7.Never perform any cleaning or maintenance operations without first unplugging the appliance; in fact, pressing the ON/OFF button on the display for more than two seconds is not enough to cut off all electrical contacts.

8.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent chil- dren who might play in or around the appliance from being locked inside.

9.Before calling for service/assistance in the case of malfunc- tion, consult the chapter entitled “Is There a Problem? to de- termine whether it is possible to eliminate the problem. do not try to repair the problem by trying to access the internal com- ponents of the appliance.

10.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

11.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

12.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump.

For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

Proper installation of the appliance is essential to en- sure the best and most efficient performance of your appliance.

Ventilation

The compressor and condenser generate heat and, there- fore, need to be ventilated properly. Rooms with less than perfect ventilation are not very suited for installation of the appliance. Therefore, it should be installed in a room with an opening (window or French window) that provide the appropriate amount of air re-circulation. It is also important that the room not be too humid.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance. For proper ventilation of the appliance, you must leave:

-a space of at least 10 cm between the top part and any cabinets above it;

-a space of at least 5 cm between the sides of the appliance and any adjacent cabinets/walls.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, cook top or the like.

Levelling

The floor should be perfectly level; if not, you can adjust the feet at the front of the appliance.

Earthing

Before making the electrical connection, check that the volt- age shown on the data plate, that you will find on the bot- tom left hand side of the appliance next to the crisper, cor- responds to that of your home and that the socket is earthed in compliance with all current electrical regulations. If the system is not earthed, the manufacturer declines all liability for consequent damages or losses. Do not use adapters or multiple sockets.

Position the appliance in such a way that you can access the socket where it is plugged in.

Check the power load

The electrical socket must support the maximum power load of the appliance shown on the data plate (on the bottom left hand side of the appliance next to the crisper).

Before plugging the appliance to the mains

Stand the appliance upright and wait at least 3 hours before plugging the appliance into the mains to ensure proper per- formance.

3

Page 3
Image 3
Hotpoint FFA45W, FFA47X manual Product Safety, Installation

FFA47X, FFA45W specifications

The Hotpoint FFA45W and FFA47X are a pair of highly regarded refrigerator models that exemplify efficiency and modern design. These appliances are particularly favored by consumers looking for reliable refrigeration solutions that deliver functionality without compromising on style.

One of the standout features of the Hotpoint FFA45W is its impressive capacity. With a generous interior space, it enables users to store a large amount of food and beverages, making it ideal for families or those who enjoy hosting gatherings. The refrigerator includes adjustable shelving, providing flexibility to store items of varying sizes. Additionally, the shelving is designed to be spill-proof, ensuring that any accidental spills are contained and do not create a mess.

On the other hand, the FFA47X model offers a sleek stainless steel finish that not only enhances its aesthetic appeal but also ensures durability. This model supports a modern kitchen decor while offering practical advantages. The aesthetic finish is easy to clean and resists fingerprints, maintaining its elegance over time.

Both models feature the innovative Fresh Zone technology designed to extend the freshness of food items. This technology maintains optimal humidity levels within the refrigerator, providing an ideal environment for fruits and vegetables, helping to reduce spoilage and waste. Additionally, the appliances come equipped with an energy-efficient cooling system, which minimizes electricity consumption while ensuring that food items are preserved at the right temperature.

An important characteristic of the Hotpoint FFA series is its adjustable thermostat, which allows users to customize the cooling environment according to their preferences. This element not only enhances the user experience but also contributes to energy savings.

Furthermore, both the FFA45W and FFA47X incorporate a simple yet effective user interface for easy temperature control and energy management. The models also come with a reversible door option, providing flexibility in placement and ensuring that they can fit seamlessly into any kitchen layout.

Overall, whether you choose the Hotpoint FFA45W or the FFA47X, you can expect a reliable appliance that combines advanced technology with ease of use, making your food storage experience both efficient and enjoyable. These models stand as a testament to Hotpoint’s commitment to quality and innovation in home appliances.