Dell E19S, R520 Removing The Cooling Shroud, Removing and Installing the Cooling Shroud

Removing The Cooling Shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data.

1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2.Open the system.

3.If applicable, remove the full-length full-height expansion card installed on slot 2 of the expansion-card riser 2

4.Hold the touch points and lift the cooling shroud away from the system.

Figure 15. Removing and Installing the Cooling Shroud

1.cooling shroud

2.expansion-card latch

3.tabs (3)

4.cooling shroud alignment slot on the cable retention bracket

5.cooling shroud alignment slots on the fan bracket (2)

40