installing your microwave oven

Installing your oven

Place the oven on a flat level surface 85cm above the floor. The surface should be strong enough to safety bear the weight of the oven.

enOv

tallings I 01 the

When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides of the oven and 20 cm (8 inches) of space above.

This microwave oven has to be positioned so that plug is accessible.

20cm above

10cm behind

 

 

85cm of

10cm on

the side

the floor

 

• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. For your personal safety, plug the cable into a 3-

pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Handling, installing and removing the water tray

1.Before installing or removing the water tray, remove the water tank from the main unit.

2.This is a plate that holds food remains or moisture in the door Insert it in the

direction of the arrow towards the front panel.

3.To remove the tray, pull it out.

4.Please be careful, as there may be water inside.

installing the oven _7

Page 7
Image 7
Samsung CQV137-S/XEF manual Installing your microwave oven, Installing your oven