Optical Drive Cable
Description | Spare part number |
|
|
Optical drive cable | |
|
|
The optical drive cable is secured to the computer with two screws and connects the optical drive to the system board.
Figure
To remove the optical drive cable:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 26).
2.Remove the rear cover (see Rear Cover on page 27).
3.Remove the two Torx T15M3.0x6.0 screws (1) that secure the connector to the computer.
4.Disconnect the connector from the optical drive (2) and from the system board (3).
54 Chapter 6 Removal and Replacement Procedures