Power Button Board and Cable
Description | Spare part number |
|
|
Power switch board assembly | |
|
|
Power button board cable | |
|
|
The power button board is located on the top right side of the computer (when viewed from the back). It is secured with two screws and has one connector.
The power button board cable connects to the bottom of the board and to the system board.
Figure
To remove the power button board:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 26).
2.Remove the rear cover (see Rear Cover on page 27).
3.Remove the tape (1) and two screws (2) that secure the board to the computer.
NOTE: Note the location of the grounding cables for proper replacement.
60 Chapter 6 Removal and Replacement Procedures