Hard Drive Cable

Description

Spare part number

 

 

Hard drive cable

646789-001

 

 

The hard drive cable is secured to the computer with two screws and connects the hard drive to the system board.

Figure 6-36Hard drive cable location

To remove the hard drive cable:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 26).

2.Remove the rear cover (see Rear Cover on page 27).

3.Remove the two Torx T15M3.0x6.0 screws (1) that secure the connector to the computer.

4.Disconnect the connector from the hard drive (2) and from the system board (3).

52 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis