©Copyright 2004 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett- Packard Company.

Notice

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting and additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

The Hewlett-Packard Company shall not be liable for incidental or consequential damages in connection with, or arising out of the furnishing, performance, or use of this document and program material which it describes.

Note: Regulatory information can be found in the Specification section of this guide.

It is not lawful in many places to make copies of the following items. When in doubt, check with a legal representative first.

•Governmental paper or documents

-Passports

-Immigration papers

-Selective service papers

-Identification badges, cards or insignias

•Governmental stamps:

-Postage stamps

-Food stamps

•Checks or drafts drawn on Governmental agencies

•Paper currency, traveler’s checks, or money orders

•Certificates of deposit

•Copyrighted works

Safety information

WARNING! To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.

Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.

WARNING! Potential shock hazard

•Read and understand all instructions in the setup poster.

•Telephone lines can develop hazardous voltages. To avoid electrical shock, do not touch the contacts on the end of the cord, or any of the sockets on the HP Fax. Replace damaged cords immediately.

•Never install telephone wiring during a lightening storm.

•Use only a grounded electrical outlet when connecting the device to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.

•Observe all warnings and instructions marked on the product.

•Unplug this product from wall outlets and telephone jacks before cleaning.

•Do not install or use this product near water or when you are wet.

•Install the product securely on a stable surface.

•Install the product in a protected location where no one can step on or trip over the line cord, and where the line cord will not be damaged.

•If the product does not operate normally, see the Troubleshooting section of this user guide.

•No operator-serviceable parts inside. Refer servicing to qualified service personnel.

•Use in a well ventilated area.