HP 12076A LAN/1000 LINK RS Command Example, Example 1. Typical Response to the RS Command, The following example illustrates use of the Read Statistics command:

RS Command Example

The following example illustrates use of the Read Statistics command:

Example 1. Typical Response to the RS Command

NM>	RS,08–00–09–00–02–00<RETURN>
Read Statistics		counters of node	08–00–09–00–02–00.... [ok]
1.	Num of good	bytes xmited	77200
2.	Num of good	bytes rcved	400
3.	Num of good	pkts xmited	386
4.	Num of good	pkts rcved	2
5.	Num of errors on xmit		0
6.	Num of errors on rcv		0
7.	Num of babble errors		0
8.	Num of heartbeat errors (xmit)		0
9.	Num of missed pkts––no rcv buf		0
10.	Num of memory errors		0
11.	Num of framing errors		0
12.	Num of pkts	driver discarded	0
13.	Num of CRC errors on rcv		0
14.	802.3 Length field errors		0
15.	Num of retry > 1 on xmit		0
16.	Num of retry = 1 on xmit		0
17.	Num of chip	deferred on xmit	0
18.	Num of underflow error on xmit		0
19.	Num of late	collisions	0
20.	Num of loss	of carrier	0
21.	Num of xmit	retry cnt exceeded	0
22.	TDR info from last TDR		0
23.	Orphan messages received by NM		0

NM>

Example 1 shows successful execution of this command, as confirmed by the •[ok]" message returned. In addition, the statistics maintained by the card and Node Manager are listed along with their current counter contents.

Using Node Manager 5%57