Record of Changes
EDITION/ |
|
UPDATE | DESCRIPTION |
1st Edition | First release of manual, no changes. |
Update 1 | Printed circuit board components changed to correct a timing |
| problem in NOVRAM support circuitry. Assembly 12076"60001 |
| date code advanced to B"2614. |
| The driver name was changed from •ID.67" to •ID*67". Also, |
| the product structure was modified to provide the driver, Node |
| Manager software, and related modules with the operating |
| system, HP 92077A, RTE"A Version 4.1 (Rev 4010) or later. |
Update 2 | With RTE"A Version 5.0, or later, the Node Management |
| software was enhanced with a Command Stack feature. The |
| Command Stack is accessed from the user interface program, |
| NM. |
| In addition, the software now checks for the availability of the |
| driver packet read program, READR, when NM is run. If |
| READ1 is not restored or running, applicable error messages |
| are displayed. |
2nd Edition | At the RTE 6.1 release, system table space required by the LAN |
| driver was significantly reduced; only one LU and DVT are now |
| required for each LAN card, and the LU can be odd or even. |
| (Previously, two consecutive LUs were used and the first had to |
| be an even"numbered LU.) The default IFT extension was |
| reduced from 204 words to 73 words; the READR program |
| (RPed as READ1 and READ2) is no longer required by the |
| LAN driver or Node Manager software; and %GEN67 which |
| contained default driver parameters is no longer used. |
| Driver and Node Manager software installation documentation |
| was pulled from the HP 12076A LAN/1000 Link Local Area |
| Network Interface Controller (LANIC) Installation Manual, |
| part number 12076"90001 and is now included as part of the |
| HP 12076A Node Manager's Manual, part number 12076"90002. |
Record of Changes D %1