Modules Provided

The following software is used with the LAN/1000 Link product. These modules can be found in the /RTE_A directory along with other RTE_A files:

%ID*67

Driver

NM.REL

Node Manager user interface routine

NMSTK.LIB

Node Manager user interface library

NM2.REL

Node Manager command parser

NMGR.REL

Node Manager command processor

MENU

Node Manager command menu

LAN8023.CMD

Transfer file to load Node Manager modules

NM.LOD

NM link command file

NM2.LOD

NM2 link command file

NMGR.LOD

NMGR link command file

Transfer these (along with other operating system modules) to your disk"based system to be used for system generation. For instructions, consult your operating system installation and generation manuals.

Answer File Entries

The system generation program RTAGN uses a command file (the answer file) to build an operating system. To generate a system that contains the LANIC card driver, a new answer file must be created, usually by editing an existing one.

Answer file entries must be made for each LANIC card installed in the host. The answer file generally consists of several primary sections: the System Relocation area, the Driver Relocation area, the Table Generation area, and the Memory Allocation area.

System Relocation

There are no additional entries required in the •System Relocation" portion of the answer file.

Driver Relocation

The •Driver Relocation" portion of the answer file must be edited to relocate the LANIC card driver into a driver partition. Since you need to relocate the driver only once, even if there are multiple LANIC cards installed, only one entry needs to be made to the answer file:

.

.

RE,/RTE_A/%ID*67,,

END

.

.

Software Installation

3%3