HP 1220C manual Installing from the Starter CD Recommended, Installation for Windows

English

8

7

Installing from the Starter CD (Recommended)

Note: For USB connections, skip to page 9.

Note: The Starter CD includes a utility that can copy the software to 3.5" high- density diskettes or to a server.

Installation for Windows 95, Windows 98, and Windows NT 4.0

Note for Windows 95 and Windows 98 users: If you see the message New Hardware Found at any time while installing the printer software, select Do not install a driver (Windows will not prompt you again) and click OK. If you see the Update Device Driver Wizard dialog box, click Next until you have a Finish option, and then click Finish.

Note for Windows NT 4.0 users: You must have administrator privileges to install a printer in Windows NT 4.0.

1.Start Microsoft Windows and make sure no other Windows applications are running.

2.Insert the Starter CD into your CD-ROM drive. The installation program runs automatically.

If the installation program does not run automatically, click Start, select Run, and at the command line box, type the letter of your computer’s CD-ROM drive followed by :\SETUP (for example, type D:\SETUP).

3.Click Install Printer Driver from the CD menu. Follow the instructions that appear on the screen to complete the printer driver installation.

Installation for Windows 3.1

1.Start Microsoft Windows and make sure no other Windows applications are running.

2.Insert the CD into the CD-ROM drive.