Speakers
Description | Spare part number |
|
|
Speakers (include speaker cables and wireless audio module antenna cables) | |
|
|
Before removing the speakers, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 33), and then remove the following components:
a.
b.Card Reader board cable (see Card Reader board cable on page 37)
c.Top cover (see Top cover on page 40)
Remove the speakers:
1.Disconnect the wireless audio module antenna cables (1) from the terminals on the wireless audio module.
NOTE: The #7/Main wireless audio module antenna cable is connected to the wireless audio module module “Main” terminal. The #8/Aux wireless audio module antenna cable is connected to the wireless audio module module “Aux” terminal.
2.Release the wireless audio module antenna cables from the clips (2) and routing channels built into the base enclosure.
48 | Chapter 4 Removal and replacement procedures |