Wireless audio module
Description | Spare part number |
|
|
Wireless audio module | |
|
|
Before removing the wireless audio module, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 33), and then remove the following components:
a.
b.Card Reader board cable (see Card Reader board cable on page 37)
c.Top cover (see Top cover on page 40)
Remove the wireless audio module:
1.Disconnect the wireless audio module antenna cables (1) from the terminals on the wireless audio module.
NOTE: The #7 wireless audio module antenna cable is connected to the wireless audio module “Main” terminal. The #8 wireless audio module antenna cable is connected to the wireless audio module “Aux” terminal.
2.Remove the Phillips PM2.0×3.8 screw (2) that secures the wireless audio module to the system board. (The wireless audio module tilts up.)
Component replacement procedures | 51 |