Dialogic® DSI SS7MD Programmer’s Manual Issue 3
•loop_mode
The diagnostic loopback mode. The following table shows the permitted values and their meanings.
Value | Description |
|
|
0 | Do not change diagnostic loopback mode |
|
|
1 | Disabled - remove any diagnostic loop |
|
|
2 | Payload loopback |
|
|
3 | Remote loopback |
|
|
4 | Local loopback |
|
|
•prbs_gen
The Pseudo Random Bit Sequence (PRBS) generation mode. The following table shows the permitted values and their meanings.
Value | Description |
0Do not change PRBS generation mode
1Disabled - remove any PRBS generation
3Generate PRBS pattern QRSS 20
6.3.3LIU_MSG_R_CONFIG – LIU Read Configuration Request
Synopsis
Message sent by the application to read back the current LIU configuration from the board.
Format
|
|
| MESSAGE HEADER |
|
|
|
|
| Field Name | Meaning | |
|
|
|
|
type |
|
| LIU_MSG_R_CONFIG (0x5e37) |
|
|
|
|
id |
|
| liu_id (in the range 0 to one less than the number of LIUs) |
|
|
|
|
src |
|
| Sending module ID |
|
|
|
|
dst |
|
| MVD_module_ID |
|
|
|
|
rsp_req |
|
| Used to request a confirmation. |
|
|
|
|
hclass |
|
| 0 |
|
|
|
|
status |
|
| 0 |
|
|
|
|
err_info |
|
| 0 |
|
|
|
|
len |
|
| 40 |
|
|
|
|
|
|
| PARAMETER AREA |
|
|
|
|
Offset |
| Size | Name |
|
|
|
|
|
|
| Parameter area formatted in the same manner as the |
|
|
| LIU_MSG_CONFIG message. |
0 |
| 40 | All fields should be set to 0. |
| The confirmation message contains the board configuration details. | ||
|
|
| |
|
|
| The user should set the fields to 0 and the module writes the current |
|
|
| configuration parameters in the confirmation message. |
|
|
|
|
Description
This message is sent to the board to read back the current operating configuration of the Line Interface Unit (LIU). The user should always request a confirmation message. The confirmation message indicates success with a status value of 0 and contains the current configuration parameters in the parameter area of the message.
63
