
Dialogic® DSI SS7MD Programmer’s Manual Issue 3
2.2Dialogic® DSI SS7MDL4 Network Interface Board - Low Profile PCI Express Form Factor
The DSI SS7MDL4 board is a x1 lane electrical, x4 lane physical, low profile PCI Express form factor, which can be installed in x4, x8, or x16 lane slots. The board is supplied with two End Brackets suitable for low profile and full height installation. Features of the DSI SS7MDL4 board are described in the following topics:
•
•
•
•
•
•
•
•
•
Capacity
Host Interface
Physical Interfaces
Protocol Resource Support
Visual Indicators
Power Requirements
Environmental Specification
Safety, EMC and Telecommunications Specifications
Reliability
2.2.1Capacity
The capacity of the DSI SS7MDL4 board is described as follows:
•Digital interfaces
—Four T1/E1 or J1 (software selectable)
—High impedance software selectable
•SS7 links
Terminate or monitor up to
Table 1. SS7 Link Termination or Monitoring Capacity of the Dialogic® DSI SS7MDL4 Network Interface Board
Link type | Max. number of links per board | |
|
| |
Q.703 LSL (64kbit/s) | 124 | |
|
| |
Q.703 LSL (56kbit/s) | 123 | |
|
| |
Q.703 LSL (48kbit/s) | 123 | |
|
| |
Q.703 Annex A HSL Framed | 4 | |
|
| |
Q.2140/Q.2110 Q.SAAL links | 128 | |
(terminated) | ||
| ||
|
| |
AAL5 (including Q.SAAL) links | 128 | |
(monitored) | ||
| ||
|
| |
ATM cell streams | 4 | |
|
|
Note: In order to monitor both directions of a signaling link, the user must separately connect each direction of the signaling link to the receive connection of two different LIUs on the DSI SS7MDL4 board.
•Dialogic® DSI Protocol Stacks
MTP2 on board; other protocols are
2.2.2Host Interface
The DSI SS7MDL4 board has a x1 electrical, x4 physical PCI Express connector. It can be installed in x4, x8, or x16 PCI Express slots.
Note: The DSI SS7MDL4 board is a high performance densely packed low profile PCIe board supporting high message rates. In achieving this performance, the board may dissipate up to 17W and this must be taken into consideration when selecting both the host chassis and the PCI Express slot in
11