Dialogic® DSI SS7MD Programmer’s Manual Issue 3
Chapter 5: Program Execution
This chapter describes how to start the software and execute programs. It assumes that:
•The software has already been installed. Refer to Chapter 3, “Installation”.
•The system.txt configuration file has been modified correctly. Refer to Section 4.4, “System Configuration” on page 29.
•The config.txt protocol configuration file has been modified correctly. Refer to Section 4.5, “Protocol Configuration” on page 32.
It contains the following sections:
•Program Execution Overview
•Program Execution Under Linux and Solaris
43
