Dialogic® DSI SS7MD Programmer’s Manual Issue 3

6.6Q.SAAL Module

This section describes the formats of all the messages used in the non-primitive interface. The full list of management requests sent to Q.SAAL includes:

•SS7_MSG_RESET - Q.SAAL Module Reset Request

•QSL_MSG_CFG_LINK - Configure Q.SAAL Link

•QSL_MSG_CFG_TIMERS - Configure Timers per Q.SAAL Link

•QSL_MSG_END_LINK - Remove Q.SAAL Link

•SS7_MSG_TRACE_MASK - Set Trace Mask Request

•SS7_MSG_R_STATE - Read Link State Request

•SS7_MSG_R_STATS - Read Link Statistics Request

•MGT_MSG_QSL_EVENT - Q.SAAL "Q.791 style" Event Indication

•MGT_MSG_SS7_STATE - Link State Indication

6.6.1SS7_MSG_RESET – Q.SAAL Module Reset Request

Synopsis:

Message used to initialize the Q.SAAL module for operation, in the same way as MTP2. Message Format:

 

 

 

MESSAGE HEADER

 

 

 

 

 

Field Name

Meaning

 

 

 

 

type

 

 

SS7_MSG_RESET (0x7200)

 

 

 

 

id

 

 

0

 

 

 

 

src

 

 

Management Module ID

 

 

 

 

dst

 

 

QSL_TASK_ID

 

 

 

 

rsp_req

 

 

Used to request a confirmation

 

 

 

 

hclass

 

 

0

 

 

 

 

status

 

 

SDE Message status code

 

 

 

 

err_info

 

 

0

 

 

 

 

len

 

 

10

 

 

 

 

 

 

 

PARAMETER AREA

 

 

 

 

Offset

 

Size

Name

 

 

 

 

0

 

4

Reserved. Set to 0

 

 

 

 

4

 

2

num_links

 

 

 

 

6

 

2

Reserved. Set to 0

 

 

 

 

8

 

2

Reserved. Set to 0

 

 

 

 

Description

First message sent to the Q.SAAL module to initialise all the per module options.

Note: This message is to be sent once for each board by the SSDM module, with the message Instance identifying the board ID.

Until this message has been received and returned with a zero status field, all other messages (except GEN_MSG_MOD_IDENT) will be returned with a non-zero status field.

GEN_MSG_MOD_IDENT messages will be processed in an identical fashion both before and after the processing of this message.

Once a SS7_MSG_RESET message has been correctly processed for a board, subsequent SS7_MSG_RESET message for the same board will be rejected with a non zero status field.

89

Page 89
Image 89
Dialogic DSI SS7MD manual Q.SAAL Module, Message Header