6 Message Reference
Note: Attempting to activate TDM timeslots that are not present on the underlying TDM (e.g., using a bitmap of 0xfffefffe when the TDM is configured as T1) may NOT result in the rejection of the configuration message.
•mgmt_id
ID of management module for status updates.
•upper_stream_id
Upper layer (layer 3) stream identifier – this is a logical identifier from the upper layer for the cell stream and is not board specific.
6.5.3ATM_MSG_END_STREAM – Remove ATM Cell Stream Configuration
Synopsis
Message used to remove an active ATM cell stream.
Format
| MESSAGE HEADER |
|
|
FIELD NAME | MEANING |
|
|
type | ATM_MSG_END_STREAM |
|
|
id | Cell Stream ID |
|
|
src | Sending module ID |
|
|
dst | ATM_module_ID |
|
|
rsp_req | Used to request a confirmation. |
|
|
hclass | 0 |
|
|
status | SDE Message status code |
|
|
err_info | 0 |
|
|
len | 0 |
|
|
Description
Sent by the user to stop processing on a previously configured ATM cell stream.
Once successfully processed, the link may be reconfigured. The confirmation message (if requested) indicates success with a status value of 0.
6.5.4ATM_MSG_R_STREAM_STATS – Per ATM Cell Stream Statistics
Synopsis
Message used to retrieved (and reset) per cell stream statistics.
Format
| MESSAGE HEADER |
|
|
FIELD NAME | MEANING |
|
|
type | ATM_MSG_R_STREAM_STATS (0x6263) |
|
|
id | Cell Stream ID |
|
|
src | Sending module ID |
|
|
dst | ATM_module_ID |
|
|
rsp_req | Used to request a confirmation. |
|
|
hclass | 0 |
|
|
status | Used to reset the statistics |
|
|
err_info | 0 |
|
|
len | 36 |
|
|
82
