Dialogic DSI SS7MD manual Atmconfig Configure the ATM Module

Dialogic® DSI SS7MD Programmer’s Manual Issue 3

7.4.1ATM_CONFIG – Configure the ATM Module

Synopsis

Global configuration of the ATM Module.

Syntax

ATM_CONFIG <options> <num_streams>

Example

ATM_CONFIG 0x0000 4

Parameters

The ATM_CONFIG command includes the following parameters:

•

•

<options>

A 16-bit value containing additional run-time options. The bit significance is as follows:

—Bit 0 - Use ATM Forum Idle cell format rather than ITU. <num_streams>

The maximum number of cell streams this module will be asked to simultaneously support. For an IMA bundle, each TDM stream within the bundle will be counted as separate.

137