7 Configuration Command Reference
7.4.3ATM_TIMER – Configure Timers for Q.SAAL Links
Synopsis
Override the default timer values for ATM Links.
Syntax
ATM_TIMER <reserved> <timer_id> <value>
Example
ATM_TIMER 0 T1 10
Parameters
The ATM_TIMER command includes the following parameters:
•<reserved>
This parameter is reserved for future use and should be set to zero.
•<timer_id>
The identifier of the timer to be changed. It should be set to one of the following values: CC, KEEP_ALIVE, NO_RESP, POLL, IDLE, T1, T2, T3.
•<value>
The timer value in milliseconds. Any timers not configured continue to be set to the values shown in the following table.
Timer ID | Default Value (ms) |
| Range (min - max) |
|
|
|
|
CC | 1,500 | 15 | - 2,500 |
|
|
|
|
KEEP_ALIVE | 300 | 15 | - 2,500 |
|
|
| |
NO_RESP | 1,500 | 100 - 10,000 | |
|
|
|
|
POLL | 100 | 20 | - 600 |
|
|
|
|
IDLE | 100 | 20 | - 600 |
|
|
| |
T1 | 5,000 | 1,000 - 20,000 | |
|
|
| |
T2 | 120,000 | 10,000 - 300,000 | |
|
|
| |
T3 | 10 | 1 - 30 | |
|
|
|
|
140
