Dialogic® DSI SS7MD Programmer’s Manual Issue 3
3.2Software Installation for Linux
The Development Package for Linux is distributed as a download from the Dialogic web site. See Section 1.1, “Related Information” on page 7.
The distribution is in the form of a single compressed file called dpklnx6.Z.
Installation of the software is described in more detail in the following topics:
•Installing the Development Package for Linux
•Installing the DSI SS7MD Source Device Driver
•Support for a Large Number of DSI Messages
•Removing the Development Package for Linux
•RPM Installation
3.2.1Installing the Development Package for Linux
Install the Development Package for Linux on a development system as follows:
1.Login and switch to a user account with root privileges.
2.Create a new directory, referred to as the “install directory”. The recommended location is /opt/dpklnx.
3.Copy the dpklnx6.Z file to the development system that is running Linux.
Note: Be sure to copy the file with the uppercase Z extension that identifies the file as a compressed file.
4.Extract the files using the command: tar
Table 2 shows the files that are extracted into the current working directory. A number of additional files relating to other products in the range are installed at the same time.
Table 2. Files Installed on a System Running Linux
File Name or Directory | Purpose | |
|
| |
libgctlib.so.<x>.<y>.<z> | Library to be linked with user's application | |
|
| |
INC | ||
|
| |
system.txt | Example system configuration file | |
|
| |
config.txt | Example protocol configuration file | |
|
| |
gctload |
| |
ssdm |
| |
tick_lnx |
| |
tim_lnx |
| |
s7_mgt | Executables for use as described elsewhere in this manual | |
s7_log | ||
| ||
s7_play |
| |
mtpsl |
| |
upe |
| |
tempmon |
| |
|
| |
SS7MD_DRIVER | SS7MD device driver source code together with build and install scripts | |
|
|
The /etc/ld.so.conf file should be edited to include the install directory.
The ldconfig utility must be run to update the run linker's configuration:
ldconfig
19
