Dialogic® DSI SS7MD Programmer’s Manual Issue 3
•
•
<def_vci>
A default AAL5 link will be configured for the cell stream to signal incoming active connections. This is the VCI that will be used for this connection. Values 0, 3, and 4 are reserved and should not be used.
Note: The default VPI/VCI combination configured here must not be specified for any AAL5 link on this cell stream.
<timeslot>
Bitmap of active timeslots within the above TDM streams. Typically the timeslot bitmap for E1 will be 0xfffefffe and for T1/J1 will be 0x01fffffe.
