Dialogic® DSI SS7MD Programmer’s Manual Issue 3
6.7.4API_MSG_CNF_IND – Configuration Completion Status Indication
Synopsis
Message issued by the s7_mgt protocol configuration utility on completion of initial configuration sequence.
Format
| MESSAGE HEADER |
|
|
Field Name | Meaning |
|
|
type | API_MSG_CNF_IND (0x0f09) |
|
|
id | 0 |
|
|
src | 0xcf |
|
|
dst | Notification module (see below) |
|
|
rsp_req | 0 |
|
|
hclass | 0 |
|
|
status | completion_status (see below) |
|
|
err_info | Reserved for future use. |
|
|
len | 0 |
|
|
Description
This message is issued by the s7_mgt protocol configuration utility on completion of the initial configuration sequence and indicates either success (status=0) or an error condition that occurred during configuration. The message is only issued when s7_mgt is run with the
s7_mgt –i0x2d
Note: It is recommended that the user invoke this option, then wait for an API_MSG_CNF_IND message to ensure that the application does not attempt to send messages until initial configuration is complete.
Parameters
The API_MSG_CNF_IND message header uses the following parameter:
•completion_status
The result of initial configuration. The following table shows the possible values and their meanings.
Value | Meaning |
|
|
0 | Success |
|
|
1 | Error opening the config.txt protocol configuration file |
|
|
2 | Syntax or value error in the config.txt protocol configuration file |
|
|
3 | Error during configuration (invalid parameters) |
|
|
4 | Error during configuration (no response) |
|
|
105
