Dialogic DSI SS7MD manual Sccpconcssr 1 2

7 Configuration Command Reference

7.7.3SCCP_CONC_SSR – SCCP Concerned Sub-System Resource

Synopsis

The SCCP_CONC_SSR command marks the specified sub-system (which was declared by SCCP_SSR) as requiring notification of changes in the accessibility of another sub-system. Notification is given in the form of an SCCP management indication.

Syntax

SCCP_CONC_SSR <id> <cssr_id> <ssr_id>

Example

SCCP_CONC_SSR 1 2 3

Parameters

The SCCP_CONC_SSR command includes the following parameters:

•<id>

A unique ID.

•<cssr_id>

The ID of the subsystem that will receive the notifications.

•<ssr_id>

The ID of the sub-system for which state changes will be issued.

7.7.4SCCP_TRACE – SCCP Trace

Synopsis

The SCCP_TRACE command is used to configure SCCP to send trace messages to the trace module whenever a specific message type is sent or received. See the SCCP Programmer’s Manual for details.

Syntax

SCCP_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask>

Example

SCCP_TRACE 0x1 0x1 0x1

Parameters

The SCCP_TRACE command includes the following parameters:

•<op_evt_mask> Output event trace mask.

•<ip_evt_mask> Input event trace mask.

•<non_prim_mask> Non-primitive trace mask.

148