hp psc 2200 series

Top edge of original

2Close the lid.

load paper

Following is the basic procedure for loading paper. There are specific considerations for loading certain types of paper, transparency film, postcards, and envelopes. After you review this procedure, see tips for loading other types of paper in the paper tray on page 12, load 4 x 6 inch photo paper on page 10, load envelopes on page 10, and load postcards or hagaki cards on page 11.

For best results, adjust the paper settings each time you change paper types or paper sizes. For more information, see set the paper type on page 13.

to load the paper tray

1Remove the output tray, and slide the paper-width and paper-length guides to their outermost positions.

Diagrams stamped on the output tray provide tips for installing print cartridges. The location of the Support Web site for OfficeJet products is also provided.

2Tap the stack on a flat surface to align the edges of the paper, and then check the paper for the following:

–Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

–Make sure all the paper in the stack is the same size and type, unless you are working with photo paper.

8

load originals and load paper