hp psc 2200 series
1Load the original on the glass.
2Press Copy, if not already lit.
3Press Options until Reduce/Enlarge appears.
4Press 
until the desired photo size appears, then press Enter.
5Press 
to select the maximum number of images that will fit on the page or one image per page.
Some larger sizes do not prompt you for a number of images. In this case, only one image is copied to the page.
6Press Start Black or Start Color.
Tip! If the selected number of photos will not fit on the page, an error message appears. Turn the original sideways (90 degrees) on the glass and start the copy again.
make a poster When you use the Poster feature you divide your original into sections, then enlarge the sections so you can assemble them into a poster.
OriginalPoster
1Load the original on the glass.
2Press Copy, if not already lit.
3Press Options until Reduce/Enlarge appears.
4Press 
until Poster appears, then press Enter. The default poster size is 2 pages wide.
5Do one of the following:
–Press Enter to select the default poster size.
–Press 
to select other poster size options, and then press Enter.
6Press Start Black or Start Color.
Tip! After you select the poster width, the HP PSC adjusts the length automatically to maintain the proportions of the original. If the original cannot be enlarged to the selected poster size, an error message appears that tells you the number of pages wide that are possible. Select a smaller poster size and make the copy again.
30 | use the copy features |