hp psc 2200 series

load envelopes

Use the print feature of your software to print to envelopes with your

HP PSC. Your HP PSC provides two methods for working with envelopes. Do not use shiny or embossed envelopes, or envelopes that have clasps or windows.

•If you are printing one envelope, slide the envelope into the envelope slot, which is located on the right side toward the back of the output tray. Insert the envelope with the flap up and on the left, as shown in the illustration. Slide the envelope until it stops.

•If you are printing multiple envelopes, remove all paper from the paper tray, and then slide a stack of envelopes into the tray, with the envelope flaps up and to the left (print-side down), until they stop.

Adjust the paper-width guide against the envelopes (be careful not to bend the envelopes). Make sure the envelopes fit within the tray (do not overload it).

Consult the help files in your word processing software for details on how to format text for printing on envelopes.

load 4 x 6 inch photo paper

Following is the procedure for loading 4-by-6 inch photo paper into your

HP PSC.

1Remove all paper from the paper tray, and then slide a stack of photo paper into the tray until it stops.

Make sure the print side (glossy) faces down.

If the photo paper you are using has perforated tabs, load the photo paper so that the tabs are closest to you.

10

load originals and load paper