hp psc 2200 series

3Press to scroll through the following report types.

–1:Last Transaction, which indicates the status of the last fax sent.

–2:Fax Log, which lists approximately the last 40 faxes sent and received.

–3:Speed Dial List, which lists your individual numbers.

–4:Menu Settings, which lists in outline form the entire menu system and indicates the current and default settings.

–5:Self-Test Report, which prints a Self-Test Report.

–6:Automatic Reports Setup, which is the automatic reports setting described in generate automated reports on page 40.

4Select the report you want, then press Enter.

control resolution and contrast

change resolution

You can change the resolution and contrast of documents that you are sending. Your changes remain in effect until you change them again; after two minutes of inactivity, settings revert to the default values.

The copy settings do not affect faxing, and the fax resolution settings do not affect copying.

Resolution affects the transmission speed and quality of faxed documents.

1Press Fax, if not already lit.

2Press Options.

–Press Enter to select Fax Mode, then enter the fax number.

–Or, press until Speed Dials appears, press Enter, then select a speed dial.

3Press Options until Resolution appears.

4Press to scroll through the available options until the one you want appears.

Your HP PSC only faxes at the highest resolution supported by the receiving fax.

If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs, we recommend that you choose Photo.

5Press Enter to select the desired option.

change contrast Change this setting if you want to send a black and white fax to be darker or lighter than the original.

control resolution and contrast

41