hp psc 2200 series

Tip! We recommend that you use Double Rings or Triple

Rings.

set up speed dialing

create individual speed-dial entries

delete speed- dial entries

Through your HP PSC or your computer, you can assign entries to fax numbers you use often. This lets you dial those numbers quickly using the front panel’s Speed Dial button and a one- or two-digit entry. You can create up to 60 individual speed-dial entries (the maximum for some models is 40).

A speed-dial entry can only be associated with one phone number; speed-dial groups are not supported.

For more information, see set up speed dialing in use the fax features in the hp photo & imaging help.

You can enter fax numbers that you will reuse frequently. We recommend that you use the software to set up speed-dial entries.

1Press Setup.

2Press 2, then press 1.

This selects Speed Dial Setup, then selects Individual Speed Dial. The first unassigned speed-dial entry appears on the display.

3Press Enter to select the displayed speed-dial entry.

4Enter the fax number to assign to that number, then press Enter.

Tip! To enter a two-second pause within a number sequence, press Symbols to display a dash.

5Enter the person’s or company’s name, then press Enter. For more information, see enter text on page 46.

6After Enter Another? appears, press 1 (Yes), if you want to set up another number, or press 2 (No) to exit.

Follow these steps to delete an individual speed-dial entry.

1Press Setup.

2Press 2, then press 2 again.

This selects Speed Dial Setup, then selects Delete Speed Dial.

3Press until the individual entry that you want to delete appears, then press Enter.

44

use the fax features