hp psc 2200 series
restore factory defaults
You can restore the original factory settings to what they were when you purchased your HP PSC. Choosing to restore your factory defaults restores all settings, except date information.
You can perform this process from the front panel only.
1Press Setup.
2Press 5, then press 3.
This selects Maintenance, and then selects Restore Factory Defaults. The factory default settings are restored.
set the power save time
The bulb in your HP PSC remains on for a specified period so that the unit is immediately ready to respond to your request. When the HP PSC has not been used within that specified period, it turns the bulb off to preserve power and displays Power Save On in the
Your unit is automatically set to enter
Follow these steps if you want the HP PSC to enter this mode earlier.
1Press Setup.
2Press 5, then press 6.
This selects Maintenance, and then selects Power Save Mode Time.
3 Press 
until the desired time appears, then press Enter.
set scroll speed
The Scroll Speed option lets you control the rate that text messages appear in the
1Press Setup.
2Press 5, then press 7.
This selects Maintenance, and then selects Set Scroll Speed.
3Press 
until the desired speed appears, then press Enter.
set the prompt delay time
The Prompt Delay option lets you control the amount of time before a message is displayed in the
1Press Setup.
2Press 5, then press 9.
restore factory defaults | 55 |