hp psc 2200 series

to uninstall from a Windows computer

1On the Windows taskbar, click Start, choose Programs or All Programs (XP), choose Hewlett-Packard, choose hp psc 2000 series, then choose uninstall software.

2Follow the directions on the screen.

3If you are asked whether you would like to remove shared files, click No.

Other programs that use these files may not work properly if the files are deleted.

4After the program finishes removing the software, disconnect your HP PSC, and restart your computer.

5To reinstall the software, insert the HP PSC 2200 Series CD-ROM into your computer’s CD-ROM drive, and follow the instructions that appear.

6After the software is installed, connect and turn on your HP PSC.

to uninstall from a Macintosh computer

1Double-click on Applications:HP All-in-One Software folder.

2 Double-click on Uninstaller.

3Follow the directions that appear on the screen.

4After the program finishes removing the software, disconnect your HP PSC, and restart your computer.

5To re-install the software, insert the HP PSC 2200 Series CD-ROM into your computer’s CD-ROM drive, and follow the instructions that appear.

When re-installing the software, follow the instructions on the Setup Poster. Do not connect the HP PSC to your computer until after you have completed the software installation.

62

additional setup information