HP 280 G1 Smart Hard Drive Detects Imminent, Determine if hard drive is giving correct, Failure

Control panel message	Description	Recommended action
1720-SMART Hard Drive Detects Imminent	Hard drive is about to fail. (Some hard drives	1.	Determine if hard drive is giving correct
Failure	have a hard drive firmware patch that will fix an		error message. Run the Drive Protection
	erroneous error message.)		System test under using F2 Diagnostics
			when booting the computer.
		2.	Apply hard drive firmware patch
			if applicable. (Available at
			http://www.hp.com/support.)
		3.	Back up contents and replace hard drive.
1796-SATA Cabling Error	One or more SATA devices are improperly	Ensure SATA connectors are used in ascending
	attached. For optimal performance, the SATA 0	order. For one device, use SATA 0. For two
	and SATA 1 connectors must be used before	devices, use SATA 0 and SATA 1. For three
	SATA 2 and SATA 3.	devices, use SATA 0, SATA 1, and SATA 2.
2212-USB Key Provisioning failure writing to	USB device used for USB key provisioning will	1.	Try a different USB key device for
device	not allow BIOS to update provision file		provisioning.
	properly.	2.	If the error persists, update to the latest
			BIOS version and ME firmware version.
		3.	If the error still persists, replace the
			system board.
2217-ME Firmware Version request failure	ME firmware is not properly responding to BIOS	1.	Reboot the computer.
	query for version information.	2.	If the error persists, update to the latest
			BIOS version and ME firmware version.
		3.	If the error still persists, replace the
			system board.
2218-ME Firmware Version should be updated	ME firmware must be updated to match current	1.	Update to the latest ME firmware version.
	functionality contained in the system BIOS.	2.	If the error persists and system BIOS has
			been recently updated, restore previous
			system BIOS version.
		3.	If the error still persists, replace the
			system board.
2219-USB Key Provisioning file has invalid	Provisioning file contained on the USB key has	1.	Recreate the provisioning file using third
header identifier	been corrupted or is not a valid version for the		party management console software.
	current ME firmware.	2.	If the error persists and system BIOS has
			been recently updated, restore previous
			system BIOS version. Otherwise, update
			the ME firmware version.
		3.	If the error still persists, replace the
			system board.
2220-USB Key Provisioning file has mismatch	Provisioning file contained on the USB key is	1.	Reboot the computer.
version	not a valid version for the current ME firmware.	2.	If the error persists and system BIOS has
			been recently updated, restore previous
			system BIOS version. Otherwise, update
			the ME firmware version.
		3.	If the error still persists, replace the
			system board.
Invalid Electronic Serial Number	Electronic serial number is missing.	Enter the correct serial number in Computer
		Setup.

98 Chapter 8 POST error messages