HP 280 G1 manual Computer Setup-File

Computer Setup—File

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 6-1Computer Setup—File

Option	Description
System Information	Lists:
	●	Product name
	●	Manufacturer
	●	SKU number
	●	Processor type/speed/stepping
	●	Installed memory size/speed, number of channels (single or dual) (if applicable)
	●	Integrated MAC address for embedded, enabled NIC (if applicable)
	●	Chassis serial number
	●	Asset tracking number
	●	System board ID and CT number
	●	BIOS revision and date
	●	AGESA version and PI version
About	Displays copyright notice.
Set Time and Date	Allows you to set system time and date.
Flash System ROM	Allows you to update the system ROM with a BIOS image file located on removable media.
Replicated Setup	Save to Removable Media
	Saves system configuration to a formatted USB flash media device.
	Restore from Removable Media
	Restores system configuration from a USB flash media device.
Default Setup	Save Current Settings as Default
	Saves the current system configuration settings as the default.
	Restore Factory Settings as Default
	Restores the factory system configuration settings as the default.
Apply Defaults and Exit	Applies the currently selected default settings and clears any established passwords.
Ignore Changes and Exit	Exits Computer Setup without applying or saving any changes.
Save Changes and Exit	Saves changes to system configuration or default settings and exits Computer Setup.

Computer Setup (F10) Utilities 53