HP 280 G1 manual Removing a hard drive

Removing a hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive.

1.Prepare the computer for disassembly (Preparation for disassembly on page 21).

2.Remove the access panel (Access panel on page 22).

3.Disconnect the power cable and data cable from the back of the hard drive (1).

4.Remove the four Torx screws that secure the hard drive to the hard drive bay (2), and then slide the drive out of the bay toward the inside of the computer (3).

Reverse this procedure to install the hard drive.

Drives 33