Drives

Description

Hard drives/Solid-state drives

1-TB

500-GB

Optical drives

DVD±RW drive

DVD-ROM drive

When installing drives, follow these guidelines:

The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0.

Connect an optical drive or secondary hard drive to one of the other SATA connectors on the system board (labeled SATA1, SATA2, and SATA3).

HP has provided four extra 6-32 silver mounting screws installed below to the optical drive bay. Use these screws to install hard drives.

30 Chapter 5 Removal and replacement procedures

Page 38
Image 38
HP 280 G1 manual Drives