HP 280 G1 manual Computer Setup-Storage, Computer Setup F10 Utility

Computer Setup—Storage

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 6-2Computer Setup—Storage

Option	Description
Device Configuration	Lists all installed BIOS-controlled storage devices.
	When a device is selected, detailed information and options are displayed. The following options may be
	presented:
	●	Hard Disk: Size, model, firmware version, serial number, connector color, SMART category.
	●	CD-ROM: Model, firmware version, serial number, connector color (not included for USB CD-ROM).
	●	Diskette: Model and firmware version.
	NOTE: Displays for USB diskette drives.
Storage Options	SATA Emulation
	Allows you to choose how the SATA controller and devices are accessed by the operating system.
	Supported options include: IDE, RAID, and AHCI (default).
	CAUTION: SATA emulation changes may prevent access to existing hard drive data and degrade or
	corrupt established volumes.
	IDE Mode- This is the default and most backwards-compatible setting of the options. Operating systems
	usually do not require additional driver support in IDE mode. Use this option for "normal" (non-RAID)
	configurations
	RAID - Allows DOS and boot access to RAID volumes. Use this mode with the RAID device driver loaded in
	the operating system to take advantage of RAID features.
	AHCI Mode (default option) - Allows operating systems with AHCI device drivers loaded to take advantage
	of more advanced features of the SATA controller.
	NOTE:		The RAID/AHCI device driver must be installed prior to attempting to boot from a RAID/ AHCI
	volume. If you attempt to boot from a RAID/AHCI volume without the required device driver installed, the
	system will crash (blue screen). RAID volumes may become corrupted if they are booted to after disabling
	RAID.
	Removable Media Boot
	Enables/disables ability to boot the system from removable media. Default is enabled.
Boot Order	Allows you to:
	●	UEFI Boot Sources: Specify the order in which EFI boot sources (such as a internal hard drive, USB
		hard drive, USB optical drive, or internal optical drive) are checked for a bootable operating system
		image. Each device on the list may be individually excluded from or included for consideration as a
		bootable operating system source.
		EFI boot sources always have precedence over legacy boot sources.
	●	Legacy Boot Sources: Specify the order in which legacy boot sources (such as a network interface
		card, internal hard drive, USB optical drive, or internal optical drive) are checked for a bootable
		operating system image. Each device on the list may be individually excluded from or included for
		consideration as a bootable operating system source.
		Specify the order of attached hard drives. The first hard drive in the order will have priority in the
		boot sequence and will be recognized as drive C (if any devices are attached).
	NOTE:		To drag a device to a preferred place, press Enter. To remove the device from consideration as a
	bootable device, press F5.

You can use F5 to disable individual boot items, as well as disable EFI boot and/or legacy boot.

54 Chapter 6 Computer Setup (F10) Utility