Using External Equipment
Computer compatibility chart
Resolution | Frequency Remarks |
720 x 400 | 70 Hz |
|
|
640 x 480 | 60 Hz |
|
|
| 72 Hz |
|
|
| 75 Hz |
|
|
800 x 600 | 60 Hz |
|
|
| 72 Hz |
|
|
| 75 Hz |
|
|
1024 x 768 | 60 Hz |
|
|
| 70 Hz |
|
|
| 75 Hz |
|
|
1280 x 720 | 60 Hz |
|
|
1280 x 768 | 60 Hz |
|
|
1280 x 1024 | 60 Hz |
|
|
NOTE
•INPUT1 (DVI) also supports 1280 x 1024 @75 Hz, and 1920 x 1080 @60 Hz signals.
CONTROL
INOUT
The control cables (commercially available) are monaural cables with mini plugs (no resistance).
CONTROL IN 
OUT
CONTROL IN 
OUT
CONTROL IN 
OUT
11
English
Connecting control cords
Connect control cords between the Plasma Display and other PIONEER equipment having the logo. You can then operate the connected equipment by sending commands from its remote control unit to the remote control sensor on the Plasma Display.
After the CONTROL IN terminals have been connected, the remote control sensors on the connected equipment do not accept commands from the remote control units. Face the remote control units to the remote control sensor on the Plasma Display when operating the connected equipment.
NOTE
•Make sure that the power is turned off when making connections.
•Complete all component connections before making control cord connections.
About SR+
The CONTROL OUT terminal on the rear of the Plasma Display supports SR+ that allows linked operations with a PIONEER AV receiver. SR+ presents functions such as the input switch linkage operation function and the DSP surround mode display function. For more information, see the instruction manual that came with the PIONEER AV receiver supporting SR+.
1Press HOME MENU.
2Select “Setup” (
/
then ENTER (ENTER/DISP.)).
3Select “SR+” (
/
).
4Select “On” (
/
).
Item | Description |
Off | SR+ is disabled. |
|
|
On | Linked operation can be performed with unit |
| connected to SR+ connectors. |
5Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) exit the menu.
NOTE
•While in connection through SR+, the volume on this Plasma Display is temporarily minimised.
37
En
