11Using External Equipment

Input signal correlation table

720*480p@59.94/60 Hz

720(1440)*480i@59.94/60 Hz

For audio, the Plasma Display supports the following:

Linear PCM (STEREO 2ch)

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

NOTE

PC signals are out of correspondence.

HDMI input display on top right corner of the Plasma Display (blue box) everytime the external devices changing the output format, this might causing the blank screen while detecting the signal format.

Connecting HDMI equipment

When using the INPUT2 or INPUT3 HDMI terminal:

INPUT2

INPUT3

 

INPUT2

 

INPUT3

HDMI

HDMI

 

 

R

L

R

L

 

 

If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.

Item

Description

Auto

Automatically identifies input digital video signals.

 

 

Color-1

Digital Component Video signals (4:2:2) locked

 

 

Color-2

Digital Component Video signals (4:4:4) locked

 

 

Color-3

Digital RGB signals (16 to 235) locked

 

 

Color-4

Digital RGB signals (0 to 255) locked

4Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

NOTE

If you select a parameter other than “Auto”, make such a setting that results in natural color.

If the images do not come in clearly, specify another digital video signal type.

For the digital video signal types to be specified, check the operation manual that came with the connected equipment.

HDMI cable having the HDMI mark (commercially available.)

AUDIO cable (commercially available.)

Connect the AUDIO cable only when inputting analogue audio signals.

HDMI equipment

To activate the HDMI terminal:

When you use the INPUT2 or INPUT3 HDMI terminal, use the following procedure to activate the terminal.

1Press HOME MENU.

2Select “Setup” (/ then ENTER (ENTER/DISP.)).

3Select “INPUT2” or “INPUT3” (/ then ENTER (ENTER/ DISP.)).

4Select “Video” or “Audio” (/).

5Set the “Video” or “Audio” setting.

6Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

To specify the type of digital video signals:

1Repeat steps 1 to 2 provided for “To activate the HDMI terminal”.

2Select “Video” (/).

3Select the type of digital video signals (/).

34

To specify the type of audio signals:

When you use the INPUT2 or INPUT3 HDMI terminal, use the following procedure to specify the type of audio signals.

1Repeat steps 1 to 2 provided for “To activate the HDMI terminal”.

2Select “Audio” (/).

3Select the type of audio signals (/).

If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.

Item

Description

Auto

Automatically identifies input audio signals.

 

 

Digital

Accepts digital audio signals.

 

 

Analogue

Accepts analogue audio signals.

4Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu.

NOTE

If no sound is output, specify another audio signal type.

For the audio signal types to be specified, check the operation manual that came with the connected equipment.

Depending on the equipment to be connected, you also need to connect analogue audio cables.

En

Page 34
Image 34
Pioneer PRO-FHD1 operating instructions Connecting Hdmi equipment, Hdmi equipment To activate the Hdmi terminal