06Preparation Preparation
Installing the Plasma Display
Over 50 cm
Over 10 cm
Location
•Avoid direct sunlight. Maintain adequate ventilation.
•Because the Plasma Display is heavy, be sure to have someone help you when moving it.
NOTE
•Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit.
16
Using the optional PIONEER stand
•For details on installation, refer to the instruction manual supplied with the stand.
CAUTION
Operating Environment
Operating environment temperature and humidity:
+0 ˚C to +40 ˚C; less than 85 % RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
CAUTION
The lower left section of the display unit shown in the illustration above is the location of the MAIN POWER switch and certain parts required for display, and the contour involves a raised projection.
As a result, when transporting and installing the unit, take adequate precautions not to subject this area to impact or unreasonable force, since damage to the parts may result.
En
