Using Setup Utility

Changing the language of Setup Utility

The following procedure explains how to change the language of Setup Utility. If Setup Utility is not already running, begin at step 1. If Setup Utility is already running, begin at step 3.

NOTE: An external keyboard (purchased separately) may be connected to the USB port to perform these steps.

1.Open the Startup Menu by turning on or restarting the Slate, and then, while the hyphen is displayed in the upper-left corner of the screen, repeatedly pressing the Volume down button (-) on the Slate or f10 on an external keyboard.

2.Press the Volume down button (-) on the Slate, or use the arrow keys on an external keyboard to advance to BIOS Setup, and then select it by pressing the Home button on the Slate or enter on an external keyboard.

3.Press and hold the Home button and then press either the Volume up button (+) or the Volume down button (-) on the Slate, or use the arrow keys on an external keyboard to select System Configuration > Language.

4.Press the Volume up button (+) or Volume down button (-) on the Slate or the arrow keys on an external keyboard to select a language, and then press the Home button on the Slate or enter on an external keyboard.

5.To save your changes and exit Setup Utility, tap Exit, and then tap Exit Saving Changes or use the arrow keys on an external keyboard to select Exit > Exit Saving Changes. Then press the Home button on the Slate or enter on an external keyboard.

Your change goes into effect immediately.

62 Chapter 11 Setup Utility (BIOS) and System Diagnostics