HP J310 manual Clear the print carriage, Identify a defective cartridge, To clear the print queue

6.Restart the computer.

7.Clear the print queue.

To clear the print queue

NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this issue.

Click here to go online for more information. Otherwise, follow the steps below.

a. Depending upon your operating system, do one of the following:

•Windows 7: From the Windows Start menu, click Devices and Printers.

•Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.

•Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and Faxes.

b. Double-click the icon for your product to open the print queue.

c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to confirm.

d. If there are still documents in the queue, restart the computer and try printing again after the computer has restarted.

e. Check the print queue again to make sure it is clear, and then try to print again. If the print queue is not clear, or if it is clear but jobs are still failing to print, proceed to the next solution.

If the above solutions do not resolve the problem, click here for more troubleshooting online.

Clear the print carriage

Remove any objects, such as paper, that are blocking the print carriage.

NOTE: Do not use any tools or other devices to remove jammed paper. Always use caution when removing jammed paper from inside the product.

Click here to go online for more information.

Identify a defective cartridge

If both the tri-color and black cartridge lights are blinking, and the power light is on, both cartridges may still have tape on, or are missing. First make sure that the pink tape has been removed from both cartridges, and that both cartridges are installed. If both cartridge

Solve a problem

Identify a defective cartridge 39