find this information, contact your network administrator or the person who set up the wireless network.
TIP: If you are using a computer running Windows, HP provides a tool called HP Home Network Diagnostic Utility that can help retrieve this information for some systems. To use this tool, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting), and then click Network Diagnostic Utility in the Quick Links section. (At this time, this tool might not be available in all languages.)
Set up the printer on your wireless network
To set up the printer on your wireless network, use one of the following methods:
•Set up the printer using the HP printer software (Recommended)
•Set up the printer using WiFi Protected Setup (WPS)
•Set up the printer using the embedded web server (EWS)
NOTE: If you have already been using the printer with a different type of connection, such as a USB connection, follow the instructions in Change the connection type to set up the printer on your wireless network.
Set up the printer using the HP printer software (Recommended)
In addition to enabling key printer features, you can use the HP printer software that came with your printer to set up wireless communication.
If you have already been using the printer with a different type of connection, such as a USB connection, follow the instructions in Change the connection type to set up the printer on your wireless network.
Set up the printer using WiFi Protected Setup (WPS)
NOTE: Only set up wireless using WPS if your wireless network uses WPA data encryption. If your wireless network uses WEP or is not using any encryption at all, use one of the other methods provided in this section to set up the printer on your wireless network.
NOTE: WPS 2.0 does not support WEP, WPA, and TKIP protocols.
NOTE: To use WPS, make sure your wireless router or wireless access point supports
WPS. Routers that support WPS often have a 
(WPS) button or a button labeled “WPS”.
You can use one of the following methods to set up the printer using WPS:
• | (WPS) or WPS button, if available, on your router. |
Push Button Method: Use the |
•PIN Method: Enter the PIN generated by the printer in the router’s configuration software.
To connect the printer using the Push Button Method
1.On the printer control panel, press the 
(Wireless) button, and then, using the buttons on the right, scroll to and select Wireless Settings.
2.Select
3.When prompted, select Push Button.
4.On the wireless router or wireless access point, press and hold the WPS button for 3 seconds. Wait for about 2 minutes. If the printer connects successfully, the wireless light stops blinking but remains lit.
Set up the printer for wireless communication | 199 |