Chapter 5
5.Press the button to the right of OK, and then select Yes to continue.
6.Do one of the following:
•Scroll to and select the ring pattern assigned by your telephone company to fax calls.
- Or -
•Select Auto Detect, and then follow the instructions on the printer’s control panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature before it finishes, the ring pattern is automatically set to the default, which is All Rings.
NOTE: If you are using either a PBX phone system that has different ring patterns for internal and external calls, you must call the fax number from an external number.
Set the dial typeUse this procedure to set
NOTE: The
To set the dial type
1.From the Home screen, press the 
(Setup) button.
2.Using the buttons on the right, scroll to and select Fax Setup, select Basic Setup, and then select Dial Type.
3.Scroll to and select Tone Dialing or Pulse Dialing.
Set the redial optionsIf the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the settings for the busy- redial and
To set the redial options
1.From the Home screen, press the 
(Setup) button.
2.Using the buttons on the right, scroll to and select Fax Setup, select Advanced Setup, and then select Busy Redial or No Answer Redial.
•Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The
•No answer redial: If this option is turned on, the printer redials automatically if the receiving fax machine does not answer. The
3.Scroll to and select the appropriate options, and then press the button to the right of OK.
62 Fax